Request a quote
HomeMoulding

15 machines from 200T to 1700T

From small brackets to large interior and two-wheeler parts. One supplier can run your smallest clip and your largest moulding.

1850 × 1415 mmMax tie-bar spacing
6,539 gMax machine shot weight (1700T)
3,400 mmMax daylight
4 makesMilacron, Yizumi, JH-Welltec, Windsor

Four tonnage classes, one shop floor

Spread across the range so a part family can move between presses without moving to another supplier.

200–400T
4 machines
200T, 320T, 350T, 400T
Max shot weight 1,100 g
480–660T
6 machines
480T, 550T ×2, 660T ×3
Max shot weight 2,421 g
910–1100T
4 machines
910T ×2, 1050T, 1100T
Max shot weight 3,358 g
1700T
1 machine
Milacron 1700T
Max shot weight 6,539 g

Shot weight is the most a machine can inject in one cycle, not the weight of the finished part. We mould components from about 20 g to 6.5 kg.

Complex tools

Up to 6 core pulls and 24 sequential valve gates on our largest press, for parts with undercuts and long flow paths.

Deep and wide parts

Tie-bar spacing up to 1850 × 1415 mm and daylight up to 3,400 mm, for helmet boxes, seat bases and large interior mouldings.

Checked at the press

First-off and in-process parts are checked in our moulding quality lab before they move on to painting or packing.

Explore the press line

Select a press to see the numbers that decide whether your tool fits: tie-bar spacing, platen size, shot weight, cores, sequentials and daylight.

1700T
Milacron
Tie-bar spacing
 
Platen size
 
Max shot weight (machine)
 
Core pulls
 
Sequential valve gates
 
Mould height
 
Daylight
 

Available capacity changes weekly, so ask us about a specific tonnage.

Every press, every dimension

Tie-bar spacing, platen size, shot weight, cores, sequentials, mould height and daylight for all 15 machines.

Show the full machine table
Injection moulding machines at Creenos, Chakan
MachineQtyMakeClamping (T)Tie bar (mm)Platen (mm)Shot wt (g)CoresSequentialsMould ht (mm)Daylight (mm)
1700T1Milacron17001850 × 14152370 × 19356,539624700–16003,400
1100T1Windsor11001545 × 12452020 × 18203,358612600–13002,550
1050T1JH-Welltec10501000 × 10001450 × 14502,90046350–12251,225
910T2Milacron9101530 × 11202000 × 16003,288410750–16002,350
660T2Milacron660950 × 9501400 × 14002,42146460–13201,780
660T1JH-Welltec660920 × 9201335 × 13351,847412350–9201,830
550T1Milacron550920 × 9201200 × 12001,170412400–9001,850
550T1Milacron550870 × 8701245 × 12452,17936536–11401,676
480T1Yizumi480830 × 8101200 × 12001,54424260–8101,590
400T1Yizumi400760 × 7101120 × 11201,10024240–7301,430
350T1Milacron350710 × 7101010 × 101044824230–7001,360
320T1Yizumi320710 × 670990 × 95098524220–6601,300
200T1Yizumi200510 × 510700 × 70039024180–520980

Makes: Milacron 8, Yizumi 4, JH-Welltec 2, Windsor 1. Available capacity changes weekly, so ask us about a specific tonnage.

Moulding shop floor at Creenos, Chakan
Moulding shop floor
Machine lines and material handling
Machine lines and material handling

Will your tool fit our presses?

Send the tool size, weight, cores and hot-runner zones. We’ll match it against all 15 machines before we quote.

Check my tool
Chandrakant ManeDirector +91 99756 80902 mane.c@creenos.in
Shantanu BhujbalDirector +91 96040 39155 marketing@creenos.in
Creenos Polymers Pvt. Ltd., Gat No. 43/3, 1H20R, Bhamboli, MIDC, Chakan, Pune – 410507